A herringbone subway tile backsplash is a sort of diagonal or curved pattern that’s often used in wall and tile flooring installations. It’s named after the pattern of the tiles, which resemble those in a football uniform. It’s an effective use of space and provides an elegant look to a kitchen remodel.
In order to create a herringbone subway tile backsplash, you’ll have to make a decision on the colors of the tile. You’ll need to decide whether you want to use one-colored tiles, two-colored tiles, or a combination of them. If you’re thinking about using two-color tiles, you’ll need to be sure to pick out both the primary and secondary colors before laying out your tile layout. Then you’ll need to choose from either single-colored tiles multi-colored tiles, or a combination of the two.
The first step to using a herringbone subway tile backsplash is to select the size of your tile. Since you’ll be putting tiles all around the room, you need to find a tile that matches the area where the tiles will be laid. A good rule of thumb is to go by the distance between adjoining tiles. If there are large spaces in the room, such as large open cabinets or a large window, you might consider going with a larger file than if you just have a few small tiles around the area.
Next, you need to choose the color of your tile. With most tile patterns, you choose the primary color, which represents the base color, and then you use a border color to define the rest of the tile. If you’re using the herringbone subway tile backsplash design, choose a primary color that’s a little darker than your other tiles. Then you’ll want to use a secondary color that is at least as bright as your main color. For example, if you chose primary white and your other tiles are red, you could choose a secondary color of blue to help define the space around it.
After you’ve selected the primary and secondary colors, you can then lay out the herringbone subway tile backsplashes on the floor. Be sure to place it in the right position so that all of them have equal width.
To create the stencil work for your stencil, you can use the same stencil paper or pattern you used for the pattern. You’ll just cut out the stencils with an exacto knife. When you’re finished cutting, you can either use glue to stick them to your tile or to tack them to your tiles using a dry adhesive like cement.
After you’ve done this, you need to place the stencils on the tiles. Once you’ve done this, lay them down in place on the tile. Make sure they’re evenly spaced so that they’ll be easier to see once you install them. When they’re completely dried, you’ll want to then add the backing material. Now you just need to put in the tiles.
Install the tiles where you want them to go on the walls, and then carefully install the backing material to hold everything in place.
Once you’ve installed the stencils, you need to make sure you’re getting them right. Don’t try to get too many of them wrong at once! Try to get the stencils all the way to the edge.
Once the tile is completely installed, you need to use a dry cloth to wipe off the excess adhesive from the wall where you applied the tile. You don’t want to leave any water on the tile or on the backsplash if you want the paint to bond properly, you’ll want to clean it up after it dries.
If you’re using the herringbone subway tile backsplash design, you’ll want to let your stencils dry overnight before you apply the paint. The reason is that the stencils will adhere better on the wall than the actual tile. Once the stencils are dry, you need to lightly sand the wall to remove any dust that’s on it, then you can apply the paint.
To finish your project, you need to make sure to prime and seal the stencils to your tile. Once you have applied the paint, you’ll be able to use the stencils to protect and finish the tile as well. Before painting your tile, seal the backsplash area, and you’re done!